Filter By:

  • Show More Brands
  • Show Fewer Brands

Seatposts

Cane Creek Thudbuster Seatpost
$164.00 - $175.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Giant Vector Carbon Seatpost
$175.00
Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.
Easton EC90 Zero Seatpost
$210.00
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's RAD and TaperWall technology distributes stress along the length of the post so it's insanely strong as well.
Bontrager Race XXX Lite Seatpost
$199.99
Bontrager's Race XXX Lite Seatpost is made of OCLV carbon for a sweet ride and minimal weight. Carbon's unique vibration damping properties smooth the road and the trail so you can go longer and harder. And, this post boasts an easy-to-use, one-bolt, infinitely-adjustable clamp.
Ritchey Superlogic Carbon LINK Seatpost
$259.95
Ritchey's Superlogic Carbon LINK reinvents the two-bolt seatpost, making it lighter, more compliant, and more versatile than ever. - Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter - LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness - 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment - Monocoque Carbon Construction - Diameters: 27.2, 30.9, 31.6mm - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Lengths: 350, 400mm - Matte UD carbon finish - 145g (27.2x350)
Ritchey Comp LINK Seatpost
$49.95
Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)
Race Face Ride XC Seatpost
$29.99
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
Easton EA70 Offset Seatpost
$79.99
A sweet upgrade for your ride, Easton's EA70 Offset seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.
Zipp Service Course SL Seatpost
$117.00
Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
TruVativ Noir T30 Seatpost
$143.00 - $144.00
TruVativ's carbon Noir T30 Seatpost is perfect for any XC rig. The Noir T30 Seatpost uses filament-wound tubes with a unidirectional carbon finish and all-new graphics. It’s light, it’s tough, and it can stand up to the abuses of XC riding and racing without looking worse for wear. Strategically positioned reinforcements add strength and keep the weight in check—just 235g and a dual bolt head design and titanium hardware keeps everything secure.
RockShox Reverb Dropper Seatpost
$299.00
New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right
Odyssey Tripod Post
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
Whisky Parts Co. No.7 Seatpost
$95.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
WeThePeople Tripod Seat Post
$26.99
WeThePeople's Tripod Seatpost is made from strong, lightweight 6061 aluminum. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear supports press into channels underneath a Tripod seat, and a single bolt up front secures the system.
Profile Design Fast Forward Carbon Seatpost
$179.99
Profile's Fast Forward Carbon Seatpost effectively changes a 73-degree seat tube angle to 78 degrees and moves your saddle forward up to 38mm. Made with multi-layer, multi-directional carbon weave, the Fast Forward is super light, too. Plus, its double-bolt micro-adjustable clamp is easy to use and super secure.
Easton EC90 Seatpost
$210.00
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's Relief-Area Design (RAD) enhances strength where the frame clamps the post.
TruVativ Stylo T30 Seatpost
$64.00
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.
Easton EA50 Seatpost
$39.99
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
Bontrager Speed Concept Seatpost (Gen. 1)
$199.99
Bontrager's Speed Concept Seatpost lets you get your fit dialed before your next triathlon or time trial. It's crafted from OCLV carbon and the one-bolt head provides simple adjustments. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics.
Race Face Next Seatpost
$129.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
Bontrager Trek Seat Mast Cap
$139.99
Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
Black Label Pivotal Seatpost
$21.99
Black Label's Pivotal Seatpost keeps things light and simple. It's short, made of lightweight and tough nylon, and accepts pivotal seats (sold separately). - Weight: 95g
Ritchey Comp Carbon 2-Bolt
$94.95
Ritchey's Comp Carbon Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Low profile clamp won't bottom out on saddle - Bolts are oriented to the axis of the rails for greatest contact area with saddle - Wide saddle clamp reduces stress on lightweight saddle rails - Works with a wide range of saddle rail dimensions - Press bonded carbon/6061 alloy - Available in 27.2 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Matte UD carbon finish - 229g (27.2/350mm)
WeThePeople Team Pivotal Seatpost
$26.99 - $27.99
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
KS LEV-Carbon Seatpost
$589.00
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
Dimension Standard Seatpost
$29.99
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
Dimension Suspension Suspension Seatpost
$33.99
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
Odyssey Pivotal Seat Post
$25.99 - $29.99
It’s a traditional straight up pivotal design with a 200mm length.
Profile Design 1/Zero Seatpost
$49.99
Profile Design's 1/Zero seatpost is the choice when you need the most aggressive position possible. Zero setback rails place you squarely above the bottom bracket for maximum power. The 2-bolt head enables micro-adjustments to your position and eases installation. The clamps evenly distribute pressure, reducing stress on carbon saddle rails.
Profile Design 1/TwentyFive Seatpost
$99.99
Profile Design's 1/TwentyFive seatpost is the choice when you need the most aggressive position possible. 25mm setback rails ensure that your fit is totally dialed before your next ride. The 2-bolt head enables micro-adjustments to your position and eases installation. The clamps evenly distribute pressure, reducing stress on carbon saddle rails.
Page 1 of 4 Next page